product in a sot-223 the central semiconductor czs5064 (0.8 amp), cs223-2m series (2 amp), and cs223-4m series (4 amp) types are epoxy molded silicon controlled rectifiers designed for sensing circuit applications and control systems. the small size and low profile of these sot-223 devices are perfect for designs with a limited board space or height requirements. for information on these devices or any other thyristors manufactured by central ? , visit: www.centralsemi.com/thyristors description selection guide 0.8 amp, 2 amp and 4 amp scrs sot-223 actual size features announcement ? 400 volts (czs5064) ? 600 and 800 volts (cs223-2 series cs223-4 series) ? low 1.8mm profile (23% lower than dpak) ? utilizes 28% less board space than an industry standard dpak 145 adams avenue ? hauppauge ? new york ? 11788 ? usa ? tel:(631) 435-1110 ? fax: (631) 435-1824 www.centralsemi.com czs5064 and cs223 series sample devices available upon request. i t (amps) 0.8 2.0 4.0 @ t c ( o c) 25 60 85 i tsm (amps) 10 10 30 v drm, v rrm (volts) 400 czs5064 600 cs223-2m cs223-4m 800 cs223-2n cs223-4n i gt 200 a 200 a 200 a v gt 0.8v 0.8v 0.8v i h 5.0ma 2.0ma 2.0ma 2005 discrete thyristor databook to order please visit: www.centralsemi.com/catalog extended range with central you?re not limited to just 0.8 amp in a sot-223. * 800 volt devices are available on request. please consult factory. * *
pa sot-223 scr mechanical specifications - sot-223 145 adams avenue ? hauppauge ? new york ? 11788 ? usa ? tel:(631) 435-1110 ? fax: (631) 435-1824 0.8 amp, 2 amp and 4 amp scrs for further information contact: sales at central semiconductor corp. (631) 435-1110 or visit our website at: www.centralsemi.com innovations in discrete semiconductors in a sot-223 ordering information for more information on this product please visit our website at www.centralsemi.com mounting pad geometry (dimensions in mm) tape dimensions and orientation (dimensions in mm) tape width: 12mm direction of unreeling * devices are taped in accordance with electronic industries association standard eia-481-1-a ? for devices taped and reeled on 7? reels, add tr suffix to part number. ? for devices taped and reeled on 13? reels, add tr13 suffix to part number. ? for devices bulk packed, add bk suffix to part number. ? all smds are available bulk packed, for prototype and manual placement applications. packaging base 7? reel = 1,000 pcs. (add tr suffix to part number) 13? reel = 4,000 pcs. (add tr13 suffix to part number) bulk = 250 pcs. (add bk suffix to part number) 1) cathode 2) anode 3) gate 4) anode lead code:
|